50mm diameter general purpose dry pressure gauge for the measurement of fluid liquids that are not highly viscous, high temperature (over 60°C), likely to solidify / crystallize, or corrosive to copper or tin alloys. Also suitable for gases (excluding oxygen or acetylene) up to 25 bar maximum.
For use in: Pneumatics, Air Compressors, HVAC Industry, Water Industry
Ranges Available: 15 PSI/Bar, 30 PSI/Bar, 60 PSI/Bar, 100 PSI/Bar, 160 PSI/Bar, 200 PSI/Bar, 300 PSI/Bar (other sizes, ranges or types may be available upon request)
Nominal Size: 50mm
Accuracy: +/- 2.5% FSD
Scales: PSI Outer (Black) & BAR Inner (Red) - Pressure œHG Outer (Black) & BAR Inner (Red) - Vacuum
Ranges: -30/0�HG Vacuum to 0/400 PSI Pressure
Mounting Options: Bottom - Direct Mounting Only (standard) Centre Back - Direct Mounting Only (standard)
Operating Temperature: Ambient: -20/+60ºC Medium: +60ºC maximum
Temperature Effect: Variation in indication caused by temperature ± 0.04 x (t2 “ t1)% of the span t1 is the reference ambient temperature in ºC t2 is the ambient temperature in ºC
Ingress Protection: IP 40 as per EN 60529
Window: Acrylic - Crystal clear, push-fit
Pressure Element: CU Alloy - Sealed Bourdon tube C-Type
Joints: Soldered with tin alloy
Movement: High Precision Brass
Process Connection & Block: Brass - 1/8� BSPT (tapered) male (standard) Brass - 1/4" BSPT (tapered) male (standard) Brass - 14mm Square block
Pointer: Aluminium - Black
Dial: Aluminium - White
Special Options: Other scales/ranges Customer logo on dial Other process connections
|
|